Product Introduction
MINSLITE-EO series catalysts are specifically designed for the purification of ethylene oxide waste gas. They enable the catalytic oxidation of ethylene oxide at relatively low temperatures, converting it into carbon dioxide and water.
This product is widely used in the manufacturing and application of medical equipment and instruments. After the ethylene oxide has been sterilized, the MINSLITE-EO catalyst will purify the exhaust gas, achieving pollution-free emissions.
Product Features
-
MINSLITE-EO has good strength, and the average wear resistance is greater than 95%, resistant to powdering during use;
-
The specific surface area is high, with a specific surface area 160-240m2/g, and a large number of microporous structures are distributed inside the catalyst, which can effectively absorb ethylene oxide and carry out catalytic conversion;
-
MINSLITE-EO is resistant to high temperature and does not contain flammable and volatile components. Safe to use, with absolutely no security risks;
-
The catalyst consists entirely of active ingredients, features a long replacement cycle, and has a normal service life of over two years;
-
The raw materials and production process of the catalyst production are completely independent and controllable, and can be supplied stably.
Applications
-
When commercial, medical, and household sterilization equipment uses ethylene oxide as a sterilization material, its exhaust gas needs to be purified;
-
Purification of various ethylene oxide waste gases.
Product parameters
|
Ethylene Oxide Removal Catalyst (MINSLITE-EO) Technical Data
|
|
Type
|
Particle Granule
|
|
Active Effective Constituent
|
＞99%
|
|
Strength
|
＞95%
|
|
Specific Surface Area
|
160-240 m2/g
|
|
Density
|
0.7-0.9 g/ml
|
|
Temperature
|
0-500 ℃
|
|
Space Velocity
|
≤10000 /h
|
|
Ethylene Oxide Removal Efficiency
|
≥95%
|
|
Note: Catalyst specification parameters can be customized according to requirements.
|
Ethylene Oxide Removal Catalyst Packing & Delivery
General Packing: 25 KG in iron barrel with moisture-proof plastic bag inside, Packing based on user's needs.
For quantity below 2 tons, Minstrong can deliver the Ethylene Oxide Removal Catalyst within 7 days.
Shipping Port: Shanghai/other port as request
Air transportation, ocean transportation, railway transportation and truck transportation are available.
Technical Support
-
Minstrong can provide you with professional catalyst application consultation, and design a reasonable exhaust gas treatment solution based on Minstrong's high-performance catalyst;
-
Minstrong can guide you in the design of process and equipment for free;
-
Minstrong can provide you with the construction of test equipment, as well as the design, manufacture and installation of supporting catalytic reactors;
-
Minstrong can provide you with on-site catalyst loading and debugging guidance.
Questions You May Care About
-
How do I determine the specification and dosage of the catalyst?
According to your working conditions, we can select catalysts with appropriate specifications and calculate reasonable dosages.
-
How can I compare the cost of catalyst?
Catalysts are not consumable materials, and are generally calculated according to volume. It is necessary to calculate the comprehensive cost of catalysts based on important factors such as specific gravity, catalytic efficiency, and service life, and at the same time assess the technical and service capabilities of suppliers to prevent after-sales risks
-
What should I do if I don’t know how to use the catalyst?
We will design a reasonable process flow according to your working conditions, and provide you with one-stop services such as catalyst selection, test plan formulation, device design and manufacture, and on-site commissioning.
-
How can I contact Minstrong?
Email: minstrong@minstrong.com
Whatapp & Wechat: +8618142685208
Mobile: 0086-18142685208
minstrong